Novatec XD642SB/A-B12 XD Freehub

• ALLOY DISC J-HOOK HUB
• SEALED BEARINGS: 4PCS
• HUB SHELL BEARINGS: 2 PCS OF #6903
• HUB SPOKE HOLES: 28 32 36
• HUB GAUGE: 14
• HUB O.L.D.: 148MM
• AXLE SIZE: 12 x 148MM
• AXLE MATERIAL: ALLOY
• HUB P.C.D.: 62MM
• HUB F.T.F.: 64.10MM
• HUB OFFSET: 6.90MM
• HUB PAWLS: 6
• CASSETTE BODY MATERIAL: ALLOY

Convertibility: This hub doesn’t support MULTI-AXLE SYSTEM so you cannot convert it into different axle size.

Tools: In case you want to maintain your hub then you might need some tools to do so (except for a few tool-less hub models). It depends of course on how deep your disassembling goes, but these are the most important tools to be ready at your hand:

• 2pcs of 17mm Wrench Key

You might also need a hub bearing puller and/or installation tool kit in case you want to change the bearings in your hub (it vary from case to case, not all hubs need it as a hammer will do the job sometime).